Car Setups & Forums

Post Reply
Forum Home > NTG Inside Line Car Setups > Las Vegas NTG IL

Rockit_442
Site Owner
Posts: 233

Las Vegas NTG: IL

 

Tires

FL:                                              FR:

Cold Pressure: 18psi            Cold Pressure: 42.0psi

Camber: 3.5                             Camber: -1.0

Caster: 4.5                                Caster: 3.5

RL:                                              RR:

Cold Pressure: 18psi             Cold Pressure: 42.0psi

Caster: 1.8                                Camber: -1.8

Front Toe Adjustments: -1/4"

Rear Toe Adjustments: L -1/4" R -1/4"

Suspension:

FL:                                             FR:

Ride Height: 6.2                     Ride Height: 6.2

Bump: 28                                 Bump: 28

Rebound: 35                           Rebound: 35

Spring: 760                              Spring: 900

RL:                                             RR:

Ride Height: 9.7                      Ride Height: 9.7

Bump: 14                                  Bump: 19

Rebound: 18                            Rebound: 24

Spring: 350                               Spring: 790

Trackbar: 5.1                            Trackbar: 5.1 -> Non Adjustable-SEE NOTE 1

Rubber: Yes                              Rubber: No

Drivetrain & Aero:

Gearing: Type A or B <- Your Choice

Brake Bias: 60.0%

Steering Lock: 14.0

Grill Tape: 65.0%

Front Splitter: 4.0

Balance:

Front Bias: 52.1%

Left Bias: 52.0%

Wedge: 50.8% <- DON’T ADJUST ON THIS PAGE!

F. Sway bar: 1600.0 R. Sway bar: 150.0

Lap Times: Mid 29s to Mid 30s

Assists: Steering: 3, AB: Off, ABS: 3, SC: 2, TC: 3

NOTE 1: In order to get a trackbar setting of 5.1, load up the default Dover setup (while at the Las Vegas track), then change what you need to get this setup. The trackbar should already be at 5.1 with the default Dover setup. If you try and change the trackbar, it will revert back to the default setting, in create a setup. Starting with the default dover setup is the only way to get a 5.1 trackbar setting. Also, DO NOT TOUCH THE WEDGE!! Ride Heights determine the wedge.

NOTE 2: This setup has a lot of grip, even after the tires start to wear a little!

NOTE 3: This setup was made with a PS3 controller & may or may not work with steering wheel setup.

--

Rockit_442

February 5, 2013 at 11:42 PM Flag Quote & Reply

Hot Wheelz
Member
Posts: 3
What top speed are you gettin with this setup cuz it feels really slow compared to the CPU?
June 20, 2013 at 7:58 PM Flag Quote & Reply

Hot Wheelz
Member
Posts: 3
Is it just me or is this setup too slow? Cuz I am barely keeping up with the CPU.
June 20, 2013 at 9:43 PM Flag Quote & Reply

cody lefler
Member
Posts: 1
I ran faster if I use the charlotte setup of Kasey kanhe
February 12, 2014 at 10:21 PM Flag Quote & Reply

Buford70
Member
Posts: 1

How do you use Dover default setup on Las Vegas track to get a trackbar of 5.1?

March 7, 2014 at 7:15 PM Flag Quote & Reply

Rockit_442
Site Owner
Posts: 233

When you go to "Apply Setup" scroll to the left until you find Dover, then load up that default setup. Once you have done that, go to "Edit Current Setup" and change what you need to change, then save under whatever name you want.

Thanks for joining the site!

--

Rockit_442

March 7, 2014 at 7:26 PM Flag Quote & Reply

Jeff
Member
Posts: 3

Im running mid to low 28s here. These guys will never be fast using high tire pressures and assist. I could see the tire pressures if you knew how to set up the rest of the car, but assist. Come on man.


March 7, 2014 at 10:20 PM Flag Quote & Reply

Dude
Member
Posts: 1

I didn't have any grip please help

June 25, 2016 at 4:39 PM Flag Quote & Reply

Thesmokeyone24/7
Member
Posts: 7

Jeff at March 7, 2014 at 10:20 PM

Im running mid to low 28s here. These guys will never be fast using high tire pressures and assist. I could see the tire pressures if you knew how to set up the rest of the car, but assist. Come on man.


How the hell do u run mid to low 28? I can't even get the time to low 29
August 18, 2019 at 4:20 PM Flag Quote & Reply

You must login to post.